Gill WindDisplay

Wind display for reading out wind speed and direction using high visibility LED technology. Compatible with the WindSonic and WindObserver anemometers. Available in two display formats (standard and marine) and 110 or 240 V ac operation with RS422 or NMEA inputs.

The Gill Instruments digital wind speed indicator is a combined wind speed and direction display available in two formats - standard or marine. Wind speed information is displayed using two, 3 digit LED arrays to display current wind speed and maximum or minimum gust data; and a double ring of 36 LEDs indicate current and average wind direction.

Gill wind speed indicators have been designed to operate with the Gill WindObserver II and WindSonic wind sensors. The Wind Display receives data directly from the wind sensor in either Gill or NMEA mode without the need for additional interfaces. It provides the power supply for the wind sensor and can be “daisy chained” to a second wind display to transfer wind sensor information.

Depending upon the capacity and type of cable used data transfer is possible up to a distance of 1000m. User configurable, this wind speed indicator can display wind speed in various scales, mph, m/s, knots, km/h and Beaufort. The power supply can also be configured to meet specific customer requirements. A standard WindDisplay has 0°-359° scale whereas the marine version, designed for use on board ships, shows 0°-180° on both sides of the scale.

• Documentatie
• Specifications

Datasheet

Gill WindDisplay (153kB)

Manual

Manual Gill WindDisplay (833kB)

Specifications WindDisplay

Display
Speed Display	3 digit, 7 seg LED display, 14.3mm height
Gust Display	3 digit, 7 seg LED display, 10.1mm height
Average	2 minutes, 10 minutes
Offset	±0.01m/s
Other	Minimum & Maximum Gusts
Wind Speed Indicator
Units	mph, m/s, knots, km/h, Beaufort
Wind Direction Indicator
Direction Display	36 LEDs circular, colour RED
Direction Average	36 LEDs circular, colour AMBER
Input / Output
Input	RS422 or NMEA for marine display (output from Gill anemometer)
Output	+15VDC Sensor Supply RS422 input with daisy-chain output
Formats	NMEA 4800 Baud GILL 9600 Baud
Power Requirement
Power Supply	220V AC or 115V AC
Mechanical
Size	144mm x 144mm x 94mm
Weight	800g
Environmental
Protection Class	IP40
Humidity	5% to 90% RH
Operating Temperature	-30ºC to +60ºC
Precipitation	300mm/hr
EMC	BS EN 50081-1: 1992 (emissions class B)